HDPE butt fusion stub end flange adapter
Injection moulded HDPE Butt fusion Stub Flange / Stub End / Flange Adaptor for HDPE pipes, available 63-1200mm in SDR11 & SDR17, high quality warranted with 15 years, competitive wholesale prices, stock available for regular sizes, prompt delivery available. Contact us for more details of HDPE butt fusion flange!
1 Description
HDPE Butt Fusion Stub Flange / Stub End / Flange Adaptor
The butt fusion method of joining is by far the most common method of connecting polyethylene pipe in all diameters. The ends of polyethylene pipe when heated and brought together under pressure with specialized equipment form one continuous "leak proof" pipeline. Properly made, a pipe fusion is as strong as the pipe itself and has the same life expectancy.
YOST HDPE butt fusion fittings are made by imported PE80 or PE100 raw material from famous suppliers that has high resistance, they are mainly used in YOST HDPE piping system for water & gas. The HDPE butt fusion fittings can fully comply with EN12201-3, EN1555 & EN ISO 15494 standard. YOST has the ability to provide HDPE butt fittings fittings in a wide variety of sizes from DN63mm to DN800mm in SDR11 & SDR13.6 / SDR17, including: end cap, stub flange, steel backing rings, equal tee, reducing tee, reducer, elbow 45deg, elbow 90deg.,etc
2,APPLICATIONS
Features:
1. Non-toxic, hygienic: PE pipe fittings are non-toxic and odorless. After strict health monitoring, they are green building materials and never scale, which can effectively improve water quality.
2. Corrosion resistance: PE is an inert material that is resistant to various chemical media.
3. PE pipe fittings are connected by butt fusion, and the interface strength is higher than the pipe itself.
4. High toughness: The elongation at break of PE pipe fittings is generally above 500%. For the uneven settlement of the foundation, it has strong adaptability and good seismic performance.
5. Excellent resistance to rapid crack propagation (RCP).
6. Excellent flexibility and scratch resistance.
7.good wear resistance, low wall friction coefficient, small flow resistance, strong conveying capacity.
8. Very convenient construction and installation.
9. Low system cost and reduced maintenance costs can greatly reduce project costs.
10. Long service life: The buried PE pipe fittings are used normally for more than 70 years.
PE accessories can be reused, fully in line with the advocacy of efficient environmental protection.
3,Product Specifications
HDPE flange adaptor can be provided from dn63mm to dn1200mm, with the dimensions as below:
| Product Name |
Specification |
SDR17 |
SDR11 |
HDPE Butt Fusion Flange Adaptor
(HDPE Flange Adaptor)
|
63 |
|
√ |
| 75 |
|
√ |
| 90 |
√ |
√ |
| 110 |
√ |
√ |
| 125 |
√ |
√ |
| 140 |
√ |
√ |
| 160 |
√ |
√ |
| 180 |
√ |
√ |
| 200 |
√ |
√ |
| 225 |
√ |
√ |
| 250 |
√ |
√ |
| 280 |
√ |
√ |
| 315 |
√ |
√ |
| 355 |
√ |
√ |
| 400 |
√ |
√ |
| 450 |
√ |
√ |
| 500 |
√ |
√ |
| 560 |
√ |
√ |
| 630 |
√ |
√ |
| 710 |
√ |
|
| 800 |
√ |
|
| 900 |
√ |
|
| 1000 |
√ |
|
| 1200 |
√ |
|
4 Loading & Shipment
5 FAQ
1.How can I get a quotation from you ?
You can leave us message, and we will reply every message in time. And you can also find our contact information on contact page.
2.Can I get samples before order ?
Yes, of course. Usually our samples are free.
3.What is your delivery time ?
The time of delivery is usually around 1 month(1*40FT as usual). We can send out in 7 days, if it has stock.
4.What is your payment terms?
Our usual payment term is 30% deposit, and rest against B/L. L/C is also acceptable
5.How can you guarantee what I got will be good ?
We are factory with 100% predelivery inspection which guarantee the quality.
Audited Supplier 
){kind=link}